|
|||
MO series CONVERTER
To dehydrate and sterilize:
• Urban waste
• Urban residues from air and maritime transport
• Urban residues from military camps
• Slaughtering scraps
• Organic urban waste
• Stock breeding faeces
• Biological sludge
ADVANTAGES OF THE MO CONVERTER SYSTEM
• Possible to treat scraps directly where they are
produced.
• Reduced weight and volume.
• Waste treated is dry and stable.
• The treatment system is completely isolated from the
external environment and does not release odours.
• Possibility of treating heterogeneous scraps including
bones, soft parts, liquids, eggs, hairs, feathers, fur
etc.
• Possibility of treating an entire animal without having to section it previously.
The MO series Converters are designed to treat abattoir and food processing waste generated by stockbreeding.
The equipment allow a fast transformation of the by-products directly on-site.
When treating scraps containing fats the equipment is provided with a batching system and reflux of absorbent material. As a result, the material obtained flows easily and can be handled without any problems.
The filal product is dry and odour-free, wholly transformed and finely ground.
The product can be used as a combustible for agricultural use, in a totally environmental respect and BSE norms about protection.
As a result of the dehydration, 50 % reduction in volume and 70 % reduction in weight (on average) are achieved.
No specialized operators are required to operate the Converter MO series.
Converter MO series doesn’t generate any kind of pollution such as waste-water or vapours released into the environment.
The MO Series Converter is suitable for merchant and cruise ships, tourist villages and military camps.
INNOVATIVE FEATURES |
|||
|
|||
TREATED PRODUCT: |
|||||||||
|
|||||||||
|
|||
The converters generate heat directly within the waste, by
means of friction and impacts.
In the case of the MO series, sterilization is guaranteed using the “moist heat” method according to which the material is maintained at high temperature with application of water inliquid form, conditions that kill micro-organisms.
In the case of the DF series, sludges and animal slurries are stabilized through pasteurization.
Vacuum is used to evaporate humidity from the waste, with a consequent saving on energy for heating.
MAIN FEATURES
The equipment is provided in parts that are suitable for standard transport, rapidly connected at the installation site. A closed-type structure, realised in steel sections, supports each component. Enamel finishing. Anti-vibration feet are used for equipment support on a concrete floor.
The process occurs in a single chamber where the waste is supplied and from where the product is extracted.
The entire process is controlled via PLC and is monitored via a tactile-type panel.
The operational parameters e.g. cycle number, data, time of events, temperature etc. are registered using a printer.
The Converter is equipped with all necessary components, including: electric power panel comprising general switch, motor actioning with variable speed, teleswitches, fuses, relays, transformers for auxiliary circuits, cooling fans, acoustic/visual communication column, control panel including PLC, tactile-type operator panel, lock key, buttons, connections, hydraulic control unit, solenoid valves, pressure accumulators, wires, bactericide batching control unit, valves, tubes and junctions.
The unit is CE marked and complies with all relative CE directives currently in force, including CE 72/23 (low voltage equipment), CE 89/336 (electromagnetic compatibility), CE 98/37 (machinery).
The equipment is provided with a servo-actioned feeder designed to lift and tip over, at each start of the treatment cycle, a special container with a volume corresponding to that of the treatment chamber. Two wheeled containers are provided in stainless steel.
TREATMENT CHAMBER
The chamber comprises: upper body in AISI 316L stainless steel, replaceable lower body and bottom, realised in anti-wear HARDOX steel; replaceable stationary blades on the wall, electric motor, rotor and two blades coupled to the drive shaft, servo-assisted cover in AISI 316L stainless steel.
The vapours exiting from the chamber travel to a filters group that comprises: pipes condenser, in AISI 316L stainless steel; reflux pump, aspiration pump and accessories, input dust filter, active carbons filter, output dust filter, absolute filter.
At the end of each work cycle, the condensate is expelled and the user must provide for its disposal e.g. into the drains or sending it to a purification station etc. The production of condensate corresponds to the humidity of the waste that is completely extracted.
OPTIONALS
Cooling station
The system comprises: cooling unit, polyethylene tank, circulation pump, assembly structure, valves, pipes and
accessories.
Feeder and screw
For the addition of absorbent materials, like shavings or already treated product, in the treatment chamber. Recommended for treatment of slaughtering scraps, organic urban waste, stockbreeding faeces, biological sludges. The system comprises: batching hopper, screw, plug-type connections.
Model |
Technical description |
Material |
Theoretical specific weight (kg/m3) |
Average humidity (%) |
Type of treatment |
Hourly throughput (kg/h) |
Electric energy (Kw/Kg) |
MO100 |
Dimensions (mm) |
Slaughtering scraps
|
500
|
50
|
Sterilization
|
40
|
0,54 |
Organic fraction
|
500
|
70
|
Sterilization
|
30
|
0,74 | ||
Urban waste
|
300
|
40
|
Sterilization
|
40
|
0,47 | ||
Animal faeces
|
900
|
70
|
Pasteurization
|
40
|
0,66 | ||
Sedimentation sludges
|
800
|
80
|
Pasteurization
|
35
|
0,75 | ||
MO200 |
Dimensioni (mm)
1700 x 1000 x 1350 Potenza 60 kw Peso 800 kg |
Slaughtering scraps
|
500
|
50
|
Sterilization
|
100
|
0,55 |
Organic fraction
|
500
|
70
|
Sterilization
|
80
|
0,74 | ||
Urban waste
|
300
|
40
|
Sterilization
|
100
|
0,48 | ||
Animal faeces
|
900
|
70
|
Pasteurization
|
90
|
0,66 | ||
Sedimentation sludges
|
800
|
80
|
Pasteurization
|
80
|
0,75 | ||
MO700 |
Dimensioni (mm) 5000 x 1700 x 3200 Potenza 240 kw Peso 4000 kg |
Slaughtering scraps
|
500
|
50
|
Sterilization
|
360
|
0,56 |
Organic fraction
|
500
|
70
|
Sterilization
|
280
|
0,75 | ||
Urban waste
|
300
|
40
|
Sterilization
|
360
|
0,49 | ||
Animal faeces
|
900
|
70
|
Pasteurization
|
340 | 0,66 | ||
Sedimentation sludges
|
800
|
80
|
Pasteurization
|
300 | 0,75 | ||
| MO1500 | Dimensioni (mm) 6500 x 2000 x 4600 Potenza 600 kw Peso 10000 kg |
Slaughtering scraps
|
500
|
50
|
Sterilization
|
900 | 0,56 |
Organic fraction
|
500
|
70
|
Sterilization
|
700 | 0,76 | ||
Urban waste
|
300
|
40
|
Sterilization
|
800 | 0,50 | ||
Animal faeces
|
900
|
70
|
Pasteurization
|
850 | 0,66 | ||
Sedimentation sludges
|
800
|
80
|
Pasteurization
|
750 | 0,75 | ||
| MO4000 | Dimensioni (mm) 8000 x 2500 x 6000 Potenza 1800 kw Peso 32000 kg |
Slaughtering scraps
|
500
|
50
|
Sterilization
|
2500 | 0,57 |
Organic fraction
|
500
|
70
|
Sterilization
|
2000 | 0,76 | ||
Urban waste
|
300
|
40
|
Sterilization
|
2300 | 0,51 | ||
Animal faeces
|
900
|
70
|
Pasteurization
|
2500 | 0,66 | ||
Sedimentation sludges
|
800
|
80
|
Pasteurization
|
2200 | 0,76 |
Note:
In the MO/DF 700, 1500 and 4000 models, height can be reduced by replacing the bin loader with a belt loader.